CLIO 2 WISHBONE BRACE PLATES
Designed to reduce the flex of the original pressed wishbones on Clio mk2 models when fitted with stiffer springs / coilovers / track tyres
PRODUCT INFO
KIT CONTENTS
CAR FITMENT
The standard OEM wishbones are of a simple pressed construction comprising of 3 sides and an open top profile. They were not designed to be put under the same loads that they can be subjected to through:
- Track use
- Harder Suspension (High Spring Rates, Coilovers, Stiffer Bushes / Sphercial bearings)
- Grippier Tyres (Semi-slicks, Slicks)
We designed our brace plates to weld directly onto the top surface of the original wishbones to close out the 'open' profile, thus increasing their overall strength and reducing unwanted compliance in the suspension system.
The extra process of adding a flared hole also allows us to keep the weight of the plate down while maintaining the overall strength of a purely flat, slightly thicker, alternative.
If you’re going to fit new coilovers, and/or stiffer suspension bushes then why not strengthen the whole system and weld on our wishbone brace plates too!
Please ensure that this kit is correct for your particular application – see the 'car fitment' tab if in doubt.
Designed to fit Ph2 Wishbones with Increased Caster
OEM # 8200257956 / 8200257957
** Welded wishbone/plates will need painting or powder coating after welding to prevent corrosion.